Filter
Top Products
22 en | Install the Detector Heads F220 Series Detectors with F220-B6RS Bases
F.01U.029.847 | -01 | 2007.02 Installation Manual Bosch Security Systems, Inc.
4.1.3 Detector Head
Install:
Install the detector head by lining up the LED on the detector
head (refer to Figure 4.2, Item 6 on page 21) with the bar on the
mounting skirt (refer to Figure 4.2, Item 7). Turn the detector
head clockwise until the LED aligns with the T mark on the
mounting skirt (refer to Figure 4.2, Item 8).
Remove:
Remove the detector ahead by turning it counter-clockwise. If
the optional locking bar is used, refer to Figure 4.3.
!
CAUTION! The mounting skirts and detector heads are
keyed. Do not force them onto the mounting bases.
1. Insert screwdriver through
the locking port and
depress the locking bar.
2. Hold the locking bar down
while turning the head
counter-clockwise until
disengaged.
Fig. 4.3 Unlocking the Locking Bar
2
1
F01U029847-01.book Page 22 Thursday, March 1, 2007 9:27 AM