Filter
Top Products
F220 Series Detectors with F220-B6RS Bases Install the Detector Heads | en 21
Bosch Security Systems, Inc. Installation Manual F.01U.029.847 | -01 | 2007.02
4.1.2 Mounting Skirt (Figure 4.2, Item 2)
Align the four alignment keys (refer to Figure 2.2, Item 12 on
page 6 and to Figure 4.2, Item 5) and press the mounting skirt
firmly down onto the mounting base (Figure 4.2, Item 3) to
engage the snap locks
.
!
CAUTION! When using the locking bar, before installing
the detector head, open the unlocking port (refer to
Figure 4.2, Item 4) by poking through the plastic with a
screwdriver.
1. Detector head (heat
detector shown in exam-
ple)
2. Mounting skirt
3. Mounting base
4. Locking port
5. Alignment keys (four
places on the bottom of
the mounting skirt and
four corresponding places
on the base)
6. LED
7. Bar on mounting skirt
8. T mark on mounting skirt
9. Locking bar in locked position
F ig. 4.2 Part Orientation for Mounting
4
6
7
8
5
5
5
1
9
2
3
5
F01U029847-01.book Page 21 Thursday, March 1, 2007 9:27 AM