Filter
Top Products
D9412GV4/D7412GV4/D7212GV4 | Owner's Manual Supplement
Bosch Security Systems, Inc. | 9/11 | F01U245224-02 25
Replace a User Key Fob
On a D1255 Keypad
1. At the USER KEYFOBS? prompt, press [ENT].
2. ENTER RFID appears. Press [NEXT] until REPLACE KEYFOB
appears. Press [ENT].
3. KEYFOB USER: ### appears scrolling with AUTO-LEARNED if the
keyfob to be replaced was auto-learned, or KEYFOB USER (###)
RFID: {assigned RFID #} appears. Press [ENT].
4. REPLACING (###) appears scrolling with RESET XMITTER.
Press the [RESET] button on the Keyfob.
5. If successful, KEYFOB ADDED appears. KEYFOB USER: ###
appears scrolling with AUTO-LEARNED. Press [ESC] to exit.
6. If not successful, an error message is displayed. KEYFOB USER:
### appears scrolling with NOT ASSIGNED. Press [ESC] to exit.
On a D1260 Keypad
1. From the Add/Change Menu press the Keyfob softkey.
2. Configure RF Keyfob for this user? appears. Press the
Yes softkey.
3. Press the Replace Keyfob softkey. Keyfob User: ###
appears scrolling with Auto-Learned if the keyfob to be
replaced was auto-learned, or Keyfob User (###) RFID:
{assigned RFID #} appears.
4. Press the Replace softkey. Replacing Keyfob: (###)
Press Xmitter Reset appears. Press the [RESET] button on
the Keyfob.
5. If successful, Keyfob Added appears followed by Keyfob
User (###) RFID: Auto-Learned. Press the Exit softkey.
6. If not successful, an error message is displayed followed by
Keyfob User (###) RFID: Not Assigned. Press the Exit
softkey.
Remove a User Keyfob
On a D1255 Keypad
1. At the USER KEYFOBS? prompt, press [ENT].
2. ENTER RFID appears. Press [NEXT] until REPLACE KEYFOB
appears. Press [ENT].