Filter
Top Products
AMC2 4W Installing | en 43
Bosch Security Systems Installation manual F.01U.024.965 | V.4 | 2006.09
Fig. 5.20 Schema of the using of the recovery diode
Each relay output has a separate jumper setting on the bottom
side of the lower circuit board to activate wet (D2)or dry (D1)
mode.
!
Risk of Damage!
Do not connect externally powered devices in wet mode. This
can damage the AMC2 4W.
i
NOTE!
A complete connection diagram of the relay output connectors
is shown in Figure 7.9.