Filter
Top Products
50 en | Operating AMC2 4W
F.01U.024.965 | V.4 | 2006.09 Installation manual Bosch Security Systems
6.2 Configuring the Ethernet Interface
To configure the AMC2 4W in a TCP/IP network environment
use the tool AmcIpConfig provided in the following directory
on the standalone or the remote server:
\\Runtime-drive:\MgtS\AccessEngine\AC\bin
This tool can be copied and used on every computer.
6.3 Resetting the AMC2 4W
When a problem occurs, first, try to fix the problem directly. If
this does not solve the problem, resetting the AMC2 4W may
help.
6.3.1 Resetting the Software
1. Insert the provided screwdriver into the hole as shown in
the figure below.
2. Push the reset button for at least three seconds.
3. The AMC2 4W will be reset and reboots. You are back in
the download program.
Now it is possible to reconfigure the AMC2 4W from the begin-
ning.
If the problem still arises, please, call your local service.
i
NOTE!
The usage of the software application to configure the
AMC2 4W via Ethernet interface is described in the online help
of the tool.