Black & Decker BWE15A Air Conditioner User Manual


 
5,
Install outer case in window
1, Place outer case in window. Lower sash until it rests behind
front flange of top channel. Bottom channel must rest be-
hind window sill.
A B
A_ouf
0 __.
C
A. Topchannel
B. Window sash
C. Bottom channel
Install left & right installation bracket and as shown in fig.
Install bolt(2 1/2" long flat head bolt and locknut) to the instal-
lation bracket and adjust them to proper length ,then use 4
short screws to fix the bracket on the case.
6. Use a wood block between the leveling bolts and the wall if the
wall is weak or if the weight of the air conditioner falls between
the studs in the wall.
2. Expand both curtains to contact the window frame. Install four
wood screws. One in each upper right and left of the curtains
and one in each bottom tab.
3. Install one screw through center hole on top channel.
4. Use two wood screws 31/32" to fix the case to windows sash.
1. Insert the foam seat behind the top of the lower window sash
and against the glass of the upper window.
A
NOTE: To make screws easier to drive, drill a pilot hole into the
sash through clearance hole in curtains.
A. Top of lower window sash
B. Foam seal
7