Filter
Top Products
Temperature
Press the TEMP/TIME up arrow button to raise the
temperature. Each time you press or hold the TEMP/TIME up
arrow button, the temperature witl go up I°F until it reaches
90°F (32°C).
NOTE: After 5 seconds, the display witt show the current room
temperature.
TEMP/TIME
_F/"C
Press the TEMP/TIME down arrow button to lower the
temperature. Each time you press or hold the TEMP/TIME
down arrow button, the temperature witl go down I°F until it
reaches 61°F (16°C).
NOTE: After 5 seconds, the display witt show the current room
temperature.
Timer Delay
To set the Timer for a 1=hour to 24=hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Timer On indicator light witl flash. Display witl
show remaining hours before the air conditioner witl turn off.
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Cool, Energy Saver or Dry.
3. For Fan, Cool or Energy Saver mode, adjust the fan speed to
High, Med or Low.
NOTE: In Dry mode, the Speed button witl not operate.
4. Adjust the temperature between 61°F and 86°F (16°C and
30°C).
NOTE: In Fan mode, the temperature cannot be set.
5. Wait 3 seconds before turning off the air conditioner.
6. Press TIMER. Timer On indicator light witl flash. Display witt
show remaining hours before the air conditioner witt turn on.
7. Press the TEMP/TIME up or down arrow button to change the
delay time from 0 hour to 24 hours.
8. After 5 seconds, Timer On indicator light witl remain on. Dis-
play witl show the current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER once after it has been programmed. Display witt
show remaining time.
2. While the display is showing the remaining time, press TIMER
again. Timer Off indicator light witl turn on.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display witt
show remaining time.
2. While the display is showing the remaining time, press the up
or down TEMP/TIME button to increase or decrease the time.
3.
After 5 seconds, the display witl show the current room
temperature.
2. Press the TEMP/TIME up or down arrow button to change the
delay time from 0 hour to 24 hours.
3. After 5 seconds, Timer On indicator light witl remain on. Dis-
play witl show the current room temperature.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer On indicator light witl flash. Display witt
show remaining hours before the air conditioner witl turn on.
3. Press the TEMP/TIME up or down arrow button to change the
delay time from 0 hour to 24 hours.
4. After 5 seconds, Timer On indicator light witl remain on.
Display witl show the current room temperature.
10