6
ATTACHING A CLEANING PAD - Fig. F
Replacement cleaning pads are available from your Black
& Decker dealer (cat. no. SMP20).
the ‘hook & loop’ side facing up.
press it down onto the cleaning pad. You are now
ready to steam clean and sanitize your floor.
NOTICE:
Always place the steam mop on the
resting mat (7) with the handle tube (4) in the upright
position when stationary and make sure the steam mop
is turned off when not in use.
REMOVING A CLEANING PAD - Fig. G
CAUTION: Always wear suitable shoes when
changing the cleaning pad on your steam mop. Do not
wear slippers or open-toed footwear.
until it cools down. (approximately five minutes)
Place the front of your shoe onto the cleaning pad
removal tab (14) and press down firmly.
NOTICE:
Always place the steam mop on the resting mat (7) with the handle (4) in the
upright position when stationary and make sure the steam mop is turned off when not in use.
ATTACHING THE CARPET GLIDER - Fig. H
Place carpet glider on the floor.
Lightly press the steam mop with attached cleaning pad
down onto the carpet glider (8) until it clicks into place.
NOTICE:
Always place the steam mop on the
resting mat (7) with the handle tube (4) in the upright
position when stationary and make sure the steam mop
is turned off when not in use.
REMOVING THE CARPET GLIDER
CAUTION: Always wear suitable shoes when
changing the carpet glider on your steam mop. Do not
wear slippers or open-toed footwear.
five minutes)
Lift the steam mop up off the carpet glider.
NOTICE: Always place the steam mop on the resting mat (7) with the handle (4) in the
upright position when stationary and make sure the steam mop is turned off when not in use.
FITTING A SCENT PACK - Fig. I
Return the handle (4) to the upright position and turn
down. (approximately five minutes).
door will open.
shown in figure I2.
auidle click is heard.
NOTICE:
Always place the steam mop on the resting
mat (7) with the handle (4) in the upright position when stationary and make sure the steam
mop is turned off when not in use.
H
F
G
9
29
30
I1 I2