Filter
Top Products
ASSEMBLY
NOTICE:
Each steam mop is 100% tested in the factory to ensure product
performance and safety. When assembling your new steam mop for the first time you may
notice water residue inside of the unit.
WARNING: Before attempting any of the following operations, make sure that the
appliance is switched off and unplugged and that the appliance is cold and contains
minimal or no water.
ATTACHING THE HANDLE - Fig. B
bottom end of the handle tube (4) into the top end of the
steam mop body (11) until it is firmly seated and clicks
into place.
ATTACHING THE STEAM HEAD - Fig. C
onto the steam head (5) until it clicks into place.
mop body by pressing the steam head release
button (12) and pulling the steam mop body off the
steam head.
ATTACHING THE HANDHELD STEAM
CLEANER - Fig. D
steam mop body (11) until it clicks into place.
REMOVING THE HAND-HELD STEAM
CLEANER - Fig. E
Push the release button (13) down and pull the hand-held
steam cleaner (3) away from the steam mop body.
5
27
11
4
26
D
27
11
4
26
B
C
27
11
4
26
E