Filter
Top Products
FUNCTIONAL DESCRIPTION
1. ON/Off switch
2. SmartSelect
TM
Button
3. Removable
Water Tank
4. Handle Tube
5. Steam Head
6. Micro-Fiber
Cleaning Pad
7. Resting Mat
8. Carpet Glider
9. Lift and Reach
Head Cleaning Pad
ASSEMBLY
NOTICE:
Each steam mop is 100% tested in the factory to ensure product
performance and safety. When assembling your new steam mop for the first time you
may notice water residue inside of the unit.
WARNING: Before attempting any of the
following operations, make sure that the appliance is
switched off and unplugged and that the appliance is
cold and contains minimal or no water.
ATTACHING THE HANDLE - Fig. B & L
appliance, slide the bottom end of the handle tube (4)
into the top end of the steam mop body (11) until it is
firmly seated and clicks into place.
ATTACHING THE STEAM HEAD - Fig. C
onto the steam head (5) until it clicks into place.
mop body by pressing the steam head release
button (13) and pulling the steam mop body off the
steam head.
ATTACHING THE WATER TANK
(11), ensure that the water tank is firmly seated.
4
A
B
C