Filter
Top Products
www.bissell.com 800.237.7691
Assembly
6
Operations
Your ProHeat 2X CleanShot comes in
three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Place lower hose rack onto back of
upper handle by pushing in and sliding
down until it snaps into place.
5. Snap tools into the tool caddy.
6. Wrap power cord and flex hose.
7. Keep flex hose snugly in place by using
the hose secure latch.
ProHeat 2X assembly is now
complete.
Special features
Your BISSELL ProHeat 2X CleanShot Professional
deep cleaner is a home cleaning system that
uses the power of heat, brushes and cleaning
formula to get the deep down dirt for a maximum
clean. Not only does it come with a lot of unique
features, it has been designed with you, the cus-
tomer, in mind.
Built-in-heater feature
BISSELL ProHeat 2X models all feature a pat-
ented built-in heater which will heat the hot
tap water you put in up to 25 degrees hotter
to safely optimize cleaning effectiveness. The
heater will never allow the temperature to
exceed 190 degrees. The heater switch on
the front of the machine controls the heater so
you have the option to turn off the heat if you
are cleaning delicate wool or oriental rugs.
Hose Secure Latch
1.
3.
2.
4.
7.