Filter
Top Products
www.bissell.com 800.237.7691
11
Operations
Carpet cleaning continued
6. Plug into a proper outlet and turn the power
and heater switches to the ON ( I )
position. Allow 1 minute for the built-in
heater to warm-up before cleaning. The
ProHeat 2X will be fully warmed and
will provide optimal performance after
a minute of continuous heated cleaning.
7. Cleaning Strokes. While pressing the
trigger, make one slow forward wet
pass and another one back. Caution:
Do not overwet. Take care not to
run over loose objects or edges of
area rugs. Stalling brush may result in
premature belt failure.
Note: Your machine is equipped
with a circuit breaker that will
automatically shut off the brush if
a large or loose object is caught
in the brush roll. If that happens,
be sure to unplug your machine,
remove the foreign object, and
then plug the machine back in to
reset the circuit breaker.
Release the trigger and make one slow
forward and backward pass over the
same area to remove any residual
dirty water and aid in drying. Repeat
cleaning passes until solution being
pulled up appears clean. Continue
passes without pressing the trigger
until you can’t see any more water
being pulled up.
8. Remove the tank from the base of the
machine by lifting up on the tank carry
handle. Carry like a bucket to a utility
sink or outside where you will dispose
of the dirty water.
8a. Unlatch the top of the tank from the
bottom by lifting up on the tank latch
located on the back of the tank.
8b. Remove the top of the tank by lifting up
on the handle.
Note how the lip on the top tank
separates from the groove in the
bottom tank. This placement is
important when putting the tank
back together.
6.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning fluids intended
for use with the deep cleaner.
Power Switch
Heater Switch
Keep plenty of genuine BISSELL
2X formula on hand so you
can clean whenever it fits your
schedule. Always use genuine
BISSELL deep cleaning formulas.
Non-BISSELL cleaning solutions
may harm the machine and
void the warranty.
8.
8b.
8a.