Bissell 8806 Vacuum Cleaner User Manual


 
How To Use This Guide
This User’s Guide is designed to help you get maximum
satisfaction from your PowerSteamer Deep Cleaner.
Enclosed you’ll find assembly instructions for cleaning
tasks, safety precautions, cleaning tips, maintenance
and troubleshooting information. Please read this guide
thoroughly before assembling and using your cleaner. Pay
particular attention to the assembly diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with all parts and
features and how they operate. Following the Guide will
enhance your ability to get top performance from your
cleaner for many years.
If you have any questions, or comments please call
BISSELL Consumer Services at 1-800-237-7691.
Your PowerSteamer assembles in two quick steps. The
only tool you will need to assemble your cleaner is a
Phillips head screwdriver.
Your PowerSteamer is packaged as two primary
components… the Lower Body and the Handle Assembly.
To assemble:
Slide the Handle Assembly (with attached Quick Release Cord
Wrap
) down into the Lower Body until it will go no further.
Secure the handle by placing one (1) Phillips head screw
(supplied) through the screw opening in the Lower Body
and into the rear of the Handle Assembly. Tighten with
screwdriver until secure.
Assembly is now complete.
Keep plenty of BISSELL Advanced Deep Cleaning Formulas on
hand so you can clean whenever it fits your schedule. Always
use BISSELL deep cleaning formulas. Non-BISSELL cleaning
solutions may harm your cleaner and void the warranty.
5
1.
2.
How To Assemble
What Comes With Your PowerSteamer
PUSH
Tough Stain Brush Tough Stain
PreCleaner
16oz. Fiber Cleansing
Formula with
Scotchgard
protector
Phillips
Head
Screw
ug310-5907_1692-1694_205.indd 5ug310-5907_1692-1694_205.indd 5 4/18/05 9:19:52 AM4/18/05 9:19:52 AM