Filter
Top Products
www.bissell.com 800.237.7691
Maintenance and care
10
Cleaning the inner cyclone & screen
Filters protect the motor from
dirt and dust particles. Use only
BISSELL replacement filters in your
PowerGroom Multi Cyclonic
1. Unplug the vacuum from the electrical outlet.
2. Remove the dirt container from the vacuum
and make sure it is empty.
3. Remove the top portion of the dirt
container by grasping the carry handle
and turning counter clockwise and pulling
up and out of the dirt container.
4. Remove the inner cyclone by grasping the
bottom of the cyclone and turning counter
clockwise to unlock. Pull straight down to
remove. Clean with a cloth to remove dust
and debris
5. Remove the screen by pulling straight
down. Clean with a cloth or a soft brush
to remove dust and debris.
6. The tank may also be wiped clean with
a damp cloth. Make sure the tank is
completely dry before reassembling.
7. To reassemble, hold the carry handle and
place the screen back onto the top portion
of the dirt container. Be sure to align the
notch on the top with the insert on the flat
edge of the screen. Then place the inner
cyclone back into the screen by aligning
the notches at the top of the inner cyclone
with the inserts inside the screen and
turning clockwise to lock into place.
8. Place the top portion back onto the dirt
container by grasping the carry handle
and turning clockwise to lock into place.
Be sure that the dirt container release
button is aligned with the emptying button
when locked into place.
3.
4.
5.