Filter
Top Products
Bissell PowerSteamer® ProHeat™ Series Service Center Repair Guide
Printed February, 2001
1/30/2004 (Revision 1)
12
20. Replace the spray tips.
21. Replace the flow indicator by pulling the two tubes downward and making sure the flow
indicator is seated snugly.
22. Replace all tubing and wiring in its proper position. See full size photo of base - page 18.
23. Put the upholstery duct into its proper position, making sure the tab on its underside is
nested into the mating ribs on the motor cover.
24. Replace the belt.
25. Make certain the brush is turning by turning the motor by hand.
26. Turn on the motor briefly to check its operation.
27. Replace the main housing