Filter
Top Products
19
To Install the Replacement Pump Belt
With the unit still on its side, loop one end of the replacement
pump belt around the red pump pulley and then the other end
around the silver motor shaft (see illustration). Do not twist the
replacement pump belt.
Re-install the toothed brush belt first onto the red pump pulley
and then onto the toothed end of the brush (see illustration).
Re-Install the brush into the base of unit.
Place the black brush arm onto the brush and slide black
brush arm into base of unit. The black brush arm and brush
should slide easily into original position(see illustration).
Re-install the red retainer plate and Phillips head screw
(see illustration).
Using your finger, gently spin the replacement pump belt on
the silver motor shaft. If assembled correctly, the replacement
pump belt should rotate freely around the silver motor shaft
and drive pulley without obstruction. The brush should also
rotate freely when the silver motor shaft is turned.
Turn the machine right side up and replace the Tank-In-
Tank, SmartMix tank and belt access door (see illustration).)
Assembly is now complete.
If you have any questions, or are having trouble installing your
replacement pump belt, please call BISSELL Consumer
Services at 1-800-237-7691.
1.
2.
3.
4.
5.
6.
7.
8.
1
2
4
5
6
7a
7b