Filter
Top Products
1. Remove the Clean Tank from the machine.
2. Unscrew the black cap on the bottom of the
solution tank and remove the insert.
3. Filling the Clean Tank:
Fill with BISSELL Formula to the formula fill line
and fill with water to the Water Line. Replace the
Cap & Insert Assembly. Place the full tank back
into the unit.
The first time you use your unit, the Gentle
Clean™ Pad will be in the unit. Based on
your flooring type and personal
preference, you may want to change
to the Gentle Clean™ Brush. To change
pad or brush, pull out sideways.
Keep plenty of genuine BISSELL Hard and Wood
Floor Cleaning Solutions on hand so you can
clean when it fits your schedule. Always use
genuine BISSELL cleaning formulas.
How To Use Your Flip-It Hard Floor Cleaner
Inserting The Gentle Clean™ Brush or Pad
7
www.bissell.com 800.237.7691
Tip:
When using a
Dry Gentle Clean™
Pad, you may
want to get it
slightly damp by
squeezing the
trigger to saturate
the pad. This will
aid in the flow of
water and formula
to clean sticky
grime and spots.
Tip:
When plugging
the unit in, make
sure to hook the
power cord into
the Cord Clip. This
will help guide the
power cord when
you flip from Dry
to Wet Cleaning.
Tip:
Use only specially
formulated
BISSELL Hard
Floor and Wood
Floor Solutions
formula.
Non-BISSELL
cleaning formulas
may harm the
machine and void
the warranty.
WARNING:
To Reduce the Risk of Fire and
Electric Shock due to internal
component damage, use only
BISSELL cleaning fluids intended
for use with the hard floor cleaner.
Cleaning Fluid Section
32 oz.
0484
32 oz.
0482
ug603-6704_5200_306.indd 7ug603-6704_5200_306.indd 7 3/1/06 11:29:01 AM3/1/06 11:29:01 AM