16
w ww.b is se ll .c a 1 8 00 2 63 -2 53 5
Tip:
Hair, string and small
objects can block
the vacuum hose or
tools. Check them
occasionally for
obstructions. See
Troubleshooting
Guide for instructions.
CAUTION:
The rotating floor brush continues to
rotate while tools are in use. To reduce
the risk of injury from moving parts,
always move the vacuum cleaner
with the carrying handle at the back
of the cleaner. Always place vacuum
cleaner on floor with handle in upright
position when using tools. Never place
your fingers under the vacuum cleaner
when it is running. Never place
powerfoot on furniture or uneven
surfaces. Do not place vacuum cleaner
close enough to objects to pull them
into rotating brush.
Handle position
Press the handle release pedal with your foot to
place your BISSELL PowerForce into one of three
cleaning positions.
1. Upright- For storage and above floor
cleaning with special tools.
2. Normal Cleaning- Press handle release
pedal once. Use for most household floor
cleaning tasks.
3. Low Cleaning- With the vacuum in normal
cleaning position press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs and beds.
Powerfoot height adjustment
The powerfoot/rotating floor brush on your BISSELL
PowerForce can be adjusted to clean several
floor surfaces.
NOTE: For optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
1. Place handle in upright position.
2. Turn height adjustment knob to desired setting.
Lowest Setting - For bare floors.
Medium Settings - For short and medium
pile carpets.
Highest Setting - For plush pile or Berber
carpet.
3. Place the handle into the normal cleaning
position and the powerfoot will adjust to the
setting chosen.
NOTE: You may also adjust the setting while
in the normal cleaning position.
Special tools
Your BISSELL PowerForce is not only a powerful
carpet and rug vacuum cleaner, it’s also a
versatile above floor vacuum cleaner when you
select one of the special tools.
1. Raise handle to upright position.
2. Grasp the quick reach handle and lift up to
separate from suction intake opening.
3. Attach tools by firmly pushing onto hose
wand or extension wand.
Operation
Tip:
Before cleaning under low furniture,
check area first for objects that might
harm the unit or block the vacuum hose.
6
w ww.b is se ll .c a 1 8 00 2 63 -2 53 5
1.
2.
3.