Filter
Top Products
www.bissell.com 800.237.7691
9
Maintenance and care
Empty Dirt Container continued
5. Put the dirt container back in the
vacuum and slide the lever to the
"Lock" position.
Note: The dirt container may be
washed in warm water with a
mild detergent. Make sure it is
completely dry before replacing.
Do not wash any components in
the dishwasher. Hand wash only.
Use only genuine BISSELL style
replacement filters in your BISSELL
CleanView Helix.
1. Unplug the cleaner from electrical outlet.
2. a) Remove the dirt container as
described in the previous section.
b) Grasp the filter cup located at the
bottom of the dirt container. Lift up
and out. DO NOT TRY TO PULL THE
CIRCULAR FOAM FITLER OUT OF
THE FILTER CUP WHILE IT IS STILL IN
THE VACUUM.
3. Grasp the plastic tab on the top of the
circular foam filters. Twist to unlock and
pull out.
4. Separate the outer foam and inner pleated
circular filters. Wash each individually by
hand in warm water. Mild detergent may
be used if desired. Rinse well, then air
dry thoroughly before putting them back
together and replacing in filter cup.
5. The filter cup may be washed in warm
water with a mild detergent. Make sure
it is completely dry before reassembling
with filters.
6. The upper tank and louvers may also be
wiped clean with a damp cloth. Reach
underneath the upper tank and turn the
rim of the louvers to unlock. Pull straight
down to remove. Make sure all parts
are dry before replacing.
2a.
2b.
3.
Cleaning the inner & outer circular filter