Filter
Top Products
Getting ready
1. Remove the clean tank from the machine.
2. Unscrew the black cap on the bottom of
the clean tank and remove the Insert.
3. Filling the clean tank:
Fill with BISSELL formula to the formula fill
line and fill with water to the water line.
Replace the insert and cap assembly. Place
the full tank back into the unit.
Inserting the Gentle Clean™ Brush or Pad
The first time you use your unit, the Gentle
Clean™ Pad will be in the unit. Based on your
flooring type and personal preference, you may
want to change to the Gentle Clean™ Brush.
Cleaning formula section
Keep plenty of genuine BISSELL Hard Floor
Solutions on hand so you can clean when it fits
your schedule. Always use genuine BISSELL
cleaning formulas.
Dry vacuuming
With the dry vacuum side of the unit facing
forward, turn the unit on and begin cleaning.
You will see dry dirt, crumbs and debris being
collected in the dirty tank. You do not have to
empty the dry debris before wet cleaning.
6
w ww.b is se ll .c om
Operation
Tip:
When using a
Dry Gentle Clean™
Pad, you may
want to get it
slightly damp by
squeezing the
trigger to saturate
the pad. This will aid
in the flow of water
and Formula
to clean sticky
grime and spots.
Tip:
When plugging
the unit in, make
sure to hook the
power cord into
the Cord Clip.
This will help
guide the power
cord when you
flip from Dry to
Wet Cleaning.
473 mL
56L9-E
Tip:
Use only specially
formulated
BISSELL Hard
Floor Solutions.
Non-BISSELL
cleaning formulas
may harm the
machine and void
the warranty.
WARNING:
To reduce the risk of fire and
electric shock due to internal
componet damage, use only
BISSELL cleaning formula
intended for use with the hard
floor cleaner.