Filter
Top Products
5
w ww.b is se ll .c om
Assembling your new BISSELL Flip-It is a simple
2 step process:
NOTE: Remove clean tank from unit first.
1. Insert the handle into the top of the unit,
making sure the spray trigger is on the wet
vacuum side. Make sure the screw opening in
the handle is aligned with the hole in the
housing of the unit.
2.
Insert screw; gently screw in until tight with the
body of the unit.
Included with the purchase of your Flip-It are the
following Specialized Cleaning Accessories:
1. The Gentle Clean
™
Brush is recommended
for use on hard floor surfaces such as tile,
vinyl, slate or surfaces that have grout or
crevices where dirt and grime collect.
2. The Gentle Clean™ Pad is intended for use
on more delicate surfaces such as sealed
hardwood, laminates or vinyl.
3. The Pleated Filter, located in the lid of the
dirty tank should be cleaned periodically.
Assembly
Product features
1
2
WARNING:
Do not plug in your
cleaner until you have
completely assembled
it per the following
instructions and
operating procedures.
WARNING:
To reduce the risk of fire,
use only BISSELL Hard Floor
Solutions in your Flip-It. Use of
cleaning formulas that contain
lemon or pine oil may damage
this appliance and void the
warranty. Chemical spot
cleaners or solvent based soil
removers should not be used.
These products may react with
the plastic materials used in
your Flip-It causing cracking or
pitting.
Power
Cord