Filter
Top Products
www.bissell.com 800.237.7691
Maintenance and care
8
Tip:
If a significant amount of
water and solution remains
in the clean tank, your unit
can be stored with liquid in
the clean tank.
After Cleaning
1. Turn power switch to OFF position.
2. Unplug power cord from outlet.
3. Empty and rinse the dirty/collection tank
after each use, OR when dirty water
reaches the indicated maximum fill line. To
remove the tank, lift up the dirty/collection
Tank retainer lever and remove the tank
from the unit.
4. Carry the dirty/collection tank to a toilet or
sink to empty.
5. Rinse tank throroughly.
6. Disconnect the cleaning tool from the
spray trigger by pushing down on
button lock and pulling straight off
(DO NOT twist tools to remove
them).
7. Once removed from the spray trigger,all
tools can be cleaned by rinsing under
clean running water.
8. Check spray nozzle for accumulated
dirt or debris. If necessary, clean with
soft bristle brush.
Machine storage
1. Wipe all surfaces with a soft cloth.
2. Wrap power cord around the cord
wrap on the back of the unit.
3. Wrap flex hose around the base of the
unit and secure the spray trigger.
4. Store unit in protected, dry area, at
room temperature (40º to 110ºF).
WARNING:
Keep spray away from face.
Failure to do so may result in
personal injury.