Bissell 50Y6 Series Carpet Cleaner User Manual


 
www.bissell.com 800.237.7691
7
Operations
Deep Reach tool attachment
select models only
1. Follow instructions 1-4 on page 5
"Getting ready".
2. Set tool on stain and press the trigger to
spray solution onto the area to be cleaned.
3. Slowly move the tool back and forth
over the soiled surface, keeping the
tool in contact with the carpet.
4. Release trigger and move tool slowly
over the soiled area to suction up
water and dirt.
5. Continue to clean the area, working
in small sections, until no more dirt
can be removed.
6. Remove tool from hose when fin-
ished. Clean under warm water
before storing.
IMPORTANT:
Check the manufacturer’s tag before
cleaning upholstery. “W” or “WS” on
the tag means you can use your Little
Green. If tag is coded with an “S” (with
diagonal strike-through), or says “Dry
Clean Only,” do not proceed. If manufac-
turer’s tag is missing or not coded, check
with your furniture dealer.
Tip:
Deep cleaning
stairs and high-
traffic areas on
a regular basis
can prolong
carpet life.
Tip:
If you would like to store
an extra tool on-board,
visit BISSELL.com or call
Consumer Services at
1-800-237-7691 to pur-
chase a tool clip holder.
Tip:
Check upholstery
stuffing before
cleaning. Colored
stuffing may
bleed through
the fabric when it
becomes wet.
3.
5.
6.