Filter
Top Products
5
www.bissell.com
Assembling your vacuum
1. Connect swivel hose by squeezing both
locking buttons and inserting it into the
suction opening on the canister. Once the
swivel hose is inserted in the suction opening,
release the locking buttons.
2. Plug the cord from the hose into the slot on
the lower left front of canister.
3. Connect and plug-in telescoping extension
wand to the handle end of the flex hose.
4. Connect the powerhead onto the telescoping
extension wand.
5. Attach the tool holder to the telescoping
extension wand and insert the tools into the
holder.
6. To extend the telescopic tube, push the
black release button and then pull the tube
to the desired length.
NOTE: Shorten length of telescopic tube for
storage.
7. To store the barefloor tool, insert the storage
clip into the storage slot on the rear of the
vacuum or on the back of the unit when in
an upright position.
1.
5.
7.
WARNING:
Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from babies and
children.
ug110-4075_48K2_1208.indd 5ug110-4075_48K2_1208.indd 5 12/22/08 10:16:17 AM12/22/08 10:16:17 AM