Filter
Top Products
www.bissell.com 800.237.7691
Operations
6
Power cord
The power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
There is also a red line, which indicates the
end of the usable cord. Do not pull the power
cord out beyond the red line.
Power button
Turn the power ON or OFF by pressing lightly
downward on the power button ( ).
Automatic cord rewind
Your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button OFF ( )and grasp the plug
to disconnect from the electrical outlet. Hold
the plug and press the automatic cord rewind
button to rewind the cord automatically.
Variable suction power control
The variable suction power control is located
on the top of the vacuum. Turn the control
toward the larger dots for maximum suction.
Turn the control toward the smaller dots to
minimize suction for lightly soiled areas or
delicate fabrics.
Power
Button
CAUTION:
Be careful to avoid injury as
cord retracts very quickly.
CAUTION:
Before using your vacuum,
make sure that the dust bag
and all filters (pre-motor and
post-motor) are in place. Do
not operate your vacuum
without the dust bag and filters.
Variable Suction
Control
Automatic Cord
Rewind Button