Filter
Top Products
5
This User’s Guide has been designed to help you get the most sat-
isfaction from your BISSELL Lift-Off. You’ll find assembly and oper-
ating instructions, safety precautions, as well as maintenance and
troubleshooting instructions. Please read this User’s Guide thor-
oughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with the parts and where
they fit. Following this User’s Guide will greatly enhance your
ability to get the most performance from your BISSELL Lift-Off
for many years.
The only tool you’ll need to assemble your vacuum cleaner
is a screwdriver.
Locate the vacuum Handle and remove the screw packet
taped to the base of the Handle.
Stand the vacuum upright and slide the base of the Handle
firmly into the grooves at the top of the vacuum body.
Check to be sure the Handle is fitted to the vacuum
body. If there is a gap in front, continue to push firmly
until the Handle is flush.
Insert two of the screws from the screw packet into the
existing holes. Tighten securely with a screwdriver.
Position the Hose Assembly on the back of the Cylinder
as shown.
Attach the Hose with the remaining two screws from the
packet. Tighten securely with a screwdriver.
How To Use This Guide
How To Put It Together
WARNING:
Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from babies
and children.
Attach Handle To Vacuum
1.
2.
3.
4.
Attach Vacuum Hose and Tools
1.
2.
ug603-5539_3750E_304 6/25/04 2:08 PM Page 5