Filter
Top Products
w w w . b i s s e l l . c o m
Operations
8
Fill the 2-in-1 water tank
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate
the handle forward to unlatch the lid.
Remove lid, turn over and locate built in
measuring cup.
3. Fill with BISSELL 2X formula to the
indicated fill line on the built in
measuring cup and pour into mouth
of the bladder.
4. Fill the bladder with clean hand hot
tap water.
*Do not boil or microwave
water as it can destroy the
bladder.
5. Replace the top of the tank by
matching the lid and tank edges.
Handle must be in the forward posi-
tion in order to replace lid. Rotate
the handle to the carrying position to
latch the lid.
Note: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6. Place tank into machine base, seating
firmly in place. Rotate tank handle
back into latched position.
6.
Tip: Thorough vacuuming
before deep cleaning will
prevent early clogging of
the lint trap.
WARNING:
To reduce the risk of fire and electric
shock due to internal component
damage, use only BISSELL cleaning
formulas intended for use with the
deep cleaner. Non-BISSELL cleaning
formulas may harm the machine and
void the warranty.
5.
1.
2.
4
3.