Filter
Top Products
9
Reconnect the tube with the Powerfoot. It should snap
into place.
Plug the Connector Plug back into base of vacuum.
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 9 p.m. EST
Saturday 9 a.m. — 5 p.m. EST
Or visit our Website - www.bissell.com
The 3M Filtrete™ Filter is located in the Powerfoot of your
vacuum cleaner. Combined with the Filtrete HEPA Dust Bag, it is
designed to promote optimum cleaning efficiency, as well as the
removal of dust and allergens. It should be regularly checked, and
changed when the filter becomes dirty. If the filter appears
excessively dirty, more frequent replacement is recommended.
To replace filter, remove the screw with a Phillips head
screwdriver.
Lift out filter frame.
Remove filter and empty into trash.
Replace with new Filtrete Style 6 filter by 3M.
Replace filter frame by sliding in the two tabs at the top
of the frame and centering over the screw hole.
Replace screw.
Make sure vacuum cleaner is unplugged.
Insert the tip of blade type screwdriver at either of the
connector tabs at the bottom of the headlight lens. Pry
gently to remove the lens.
Remove old bulb.
Push new bulb into place.
Reinstall lens.
Cleaning the Dust Tube
5.
1.
2.
Replacing the Filter
5.
6.
WARNING:
To reduce the risk of injury
from moving parts turn
off vacuum cleaner and
disconnect Power Source
Plug from electrical outlet.
6.
3.
4.
Replacing the Light Bulb
1.
2.
5.
3.
4.