Filter
Top Products
5
This User’s Guide is designed to help you gain the best
performance from your BISSELL
®
Lightweight Upright Vacuum
Cleaner. Inside you will find assembly and operating instructions,
safety precautions, and maintenance and troubleshooting
instructions. Please read through this Guide thoroughly before
assembling and using your vacuum cleaner.
Refer to the Product Diagram in this section to locate and
familiarize yourself with its parts and features. This will be
helpful in assembling the unit and in finding the proper location
of parts when you perform routine maintenance. Additional
diagrams are included in the maintenance and troubleshooting
sections to simplify those tasks.
The ProLite is packaged for convenience and requires minimal
assembly. The only tool you will need is a Phillips head screwdriver.
Slide the Handle Tube into the Connector, aligning the
hole in the Handle Tube with the molded hole at the top
of the Connector.
Hold the hex nut in front of the connector in the hex
shaped cavity while inserting the screw with your finger
from the back. Tighten while placing your finger over the
hex cavity to hold the hex nut in place. After a few turns,
tighten further with a Phillips head screwdriver. Do not
overtighten.
Slide screw through plastic retainer from the inside, and
bag. Slide spacer onto screw and line up with hole in
Handle Tube. Tighten screw.
Remove screw from filter cover. Remove filter cover.
Insert the Connector Plug into the back of the unit at the
rear of the Powerfoot–make sure it is fully inserted.
Replace filter cover. Replace filter cover screw.
Your vacuum cleaner is now ready to use.
How To Use This Guide
How To Assemble
WARNING:
Plastic bags or film can be
dangerous. To avoid danger of
suffocation, keep away from
babies and children.
4.
1.
2.
3.