Filter
Top Products
Lower Cord
Wrap
Upper Cord
Wrap
Power cord storage
When you are done using your BISSELL Easy
Vac, store the Power Cord.
1. Turn the Easy Vac off by moving switch to
"Off" position.
2. Unplug power cord by grasping the
polarized plug (NOT the cord) and
disconnect from outlet.
3. Loop power cord around cord wraps on side
of cleaner, making certain quick release cord
wrap is pointed up towards handle.
4. Clip molded plug to power cord to
secure.
To maintain maximum performance from your
Easy Vac , perform these simple
maintenance checks weekly:
Check the debris level in the Dirt Cup and
empty if necessary.
Check the Filter for damage. Remove
debris and wash or replace as needed.
Check Rotating PowerBrush and remove
any strings, hair or debris
Replacement filter
As you vacuum, dirt and debris are deposited
in the Dirt Cup while air passes through the
Filter before being returned to the room.
This process enhances the vacuum path
while dramatically reducing dust, dirt, and
potential allergens from the air you breathe.
Replacing the Filter periodically enhances
vacuum power and air quality.
Use only BISSELL replacement filters in your
Easy Vac.
Replacement Filter #32047.
Or for higher filtration and efficiency,
you may use Filtrete™ Filters #32046.
8
www.bissell.com 800.237.7691
Operations (continued)
Maintenance and care
Tip:
Vacuuming
new carpet or
vacuuming fine
powders such as
drywall dust may
clog the filter, so
check it more
frequently. Shake
out or replace
as necessary.
WARNING:
To reduce the risk of
injury from moving parts
and/ or electrical shock,
turn Power Switch OFF
and disconnect polarized
plug from electrical
outlet before performing
troubleshooting checks.
ug010-0136_3108-8_706.indd 8ug010-0136_3108-8_706.indd 8 7/27/06 4:37:34 PM7/27/06 4:37:34 PM