Filter
Top Products
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
15
Maintenance and care
Machine care
For best results, a few simple steps
can assure your machine is well
maintained after cleaning is
complete.
1. Flush your machine of any remaining
residual solution.
a. Fill the 2-in-1 clean water tank (bladder)
with clean hot tap water.
b. Plug your machine into a proper outlet
and set the ReadyTools dial to the "FLOOR
CLEANING" setting. Turn the power on by
pressing the power button.
c. Recline the handle and press the
spray trigger for 15 seconds while making
forward and backward passes on carpet.
Release the trigger to suction. Repeat for
another 15 seconds. Continue without
pressing the trigger until there is no more
water being suctioned.
2. Turn power switch off. Unplug the
machine and wrap the power cord.
3. After emptying the 2-in-1 water tank, rinse with
running hot tap water, taking care to clean
underneath and around the heavy duty blad-
der. Clean out red lint screen (located on tank
lid). Removable nozzle may be rinsed if
necessary.
4. Replace the 2-in-1 water tank on the machine.
5. Any loose hair or debris can be pulled
from the brush roll and thrown away.
6. To clean attachments, remove from hose and
rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from the tap. Before wrapping back on
machine, lift end of hose and stretch out to
ensure all water is cleared from hose. Refer
to page 13.
7. Wipe the machine’s exterior with a soft cloth.
8. After carpet is dry, vacuum again to
remove hair and fuzz.
Machine storage
Store deep cleaner in a protected, dry area
(closet or basement). Since this product uses
water, it must not be stored where there is dan-
ger of freezing. Freezing will damage internal
components and void the warranty.
WARNING:
To reduce the risk of fire, electric
shock or injury, unplug from the out-
let before servicing.
Lint Screen