Filter
Top Products
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
14
Hard Floor Cleaning
Select Models Only
Your deep cleaner may have included
a hard floor tool and Hard Floor
Solutions Formula. The hard floor tool
provides effective cleaning for lino-
leum, vinyl, and tile floors.
Caution: Do not use on unsealed hard-
wood floors.
1. Thoroughly vacuum or sweep floor to
pick up any debris.
NOTE: Prior to filling with formula
and water be sure all carpet clean-
ing formula is thoroughly rinsed
from tank.
2. Fill BISSELL 2X Hard Floor Solutions
Formula to the indicated fill line in the
built in measuring cup and pour into
mouth of bladder.
3. Fill the bladder with clean hot tap water
and set aside.
4. Attach the hard floor tool to the bottom
of the machine by hooking it into the
nozzle and swinging it down until it
clicks into place.
5. Be sure the ReadyTools dial is set to
"FLOOR CLEANING".
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make
one slow forward wet pass and another
back. Caution: Do Not Overwet.
9. Repeat the motion without pressing the
trigger using the hard floor tool to
squeegee and suction up the dirty
water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to
the Maintenance section on page 15 for
machine clean up and storage instructions.
4.
WARNING:
To reduce the risk of fire and
electric shock- when cleaning a
hard floor, the BISSELL bare floor
tool kit 203-5641 must be used and
it must only be used with BISSELL
Hard Floor Solutions or BISSELL 2X
Hard Floor Solutions cleaning fluid
intended for use with this appliance.
Operations