Filter
Top Products
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
Maintenance and care
1. Turn off vacuum and unplug it from
electrical outlet.
2. Remove dirt cup by sliding the dirt cup
release lever to the right. Then pull dirt
cup out.
3. Remove lower tank.
4. Grasp the circular filters and twist to
unlock. Pull straight up to remove.
5. Separate the outer foam and the inner
pleated circular filters. Wash them by
hand in warm water. Mild detergent
may be used if desired. Rinse well, then
air dry thoroughly before putting back
together and replacing in lower tank.
6. Place the filters back into the lower tank
and twist to lock into place.
Tip:
Vacuuming new carpet or vacuuming
fine powders such as drywall dust may
clog the filters, so check them more fre-
quently. Shake out or replace as
necessary.
Cleaning the lower tank and inner/outer circular filters
2.
4.