Filter
Top Products
Assembly
This user’s guide has been designed
to help you get the utmost satisfaction
from your Easy Vac. You’ll find assem-
bly and operating instructions, safety
precautions, as well as maintenance
and troubleshooting instructions. Please
read this guide thoroughly before
assembling your vacuum cleaner.
Pay particular attention to the prod-
uct diagram, assembly instructions,
and part names. Locate and organize
all parts before assembly. Familiarize
yourself with the parts and where they
go. Following this user’s guide will
greatly enhance your ability to get the
most performance from your vacuum
for many years.
Your vacuum comes in two, easy-to-
assemble components: the handle and
the base.
1. Position the handle so the lower snap is
facing the back of the vacuum.
2. Line up the holes on the base with the
snap and knob on the handle.
3. Insert the handle into the base and push
until you hear it lock into place.
Note: The handle is designed so
only the correct snaps will fit com-
fortably with the holes in the base.
Do not use excessive force while
assembling this vacuum. It should
fit together with ease.
4. Wrap power cord around cord wraps
and place attachments in their correct
holders.
Your vacuum assembly is now
complete.
Handle position
Press the detent lever with your foot
to place your vacuum in one of three
positions.
1. Upright- For storage and transporting.
2. Normal Cleaning- Press detent lever once.
Use for most household floor cleaning tasks.
3. Low Cleaning- With the vacuum in nor-
mal cleaning position, press detent lever
again. Use for reaching under low furni-
ture, such as tables, chairs, or beds.
5
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Dusting Brush
Stretch Hose
Handle
Lower Snap
Base
Dusting Brush
Crevice Tool
1.
2.
3.
WARNING:
Do not plug in your vacuum clean-
er until you have completely assem-
bled it per the following instructions
and are familiar with all instructions
and operating procedures.