6
Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean in 3’ X 4’
sections, starting in areas farthest from exit. Plan to leave a path
open to empty soiled water and refill cleaner.
Carpeting will dry in three to four hours, depending on carpet
style and air circulation in room. A floor fan speeds drying.
Replace furniture on damp carpeting by placing waxed
paper under legs until floor dries completely.
Remove the Clean Water/Solution Tank by lifting it straight
up, then away from the Lower Body.
Unscrew the black cap at the bottom of the
Clean Water/Solution Tank.
Add one of the BISSELL Cleaning Formulas for Deep
Cleaning Machines to the formula fill line on the Clean
Water/Solution Tank. Fill the rest of the tank with hand hot
(not boiling) tap water to the water fill line. Replace and
tighten the black cap.
Place Clean Water/Solution Tank on Lower Body.
Rotate Quick Release Cord Wrap™ to release the Power
Cord and plug into an outlet.
2.
1.
2.
3.
4.
6.
5.
5.
Tip:
Always vacuum thoroughly before
you deep clean. If possible, move
large furniture to an area you will
not be cleaning.
How To Use Your BISSELL QuickWash
How To Begin
Getting Ready
1.
3.
4.
WARNING:
To reduce the risk of
fire, use only BISSELL
Cleaning Formulas
for Deep Cleaning
Machines. Use of
cleaning formulas that
contain lemon or pine
oil may damage this
appliance and void
warranty. Chemical
spot cleaners or
solvent-based soil
removers should not be
used. These products
may react with the
plastic materials used
in your QuickWash,
causing cracking
or pitting.
Tip:
Deep cleaning
spots, spills
and high traffic
areas on a
regular basis can
prolong
carpet life.
2.
ug603-5601_1970E_1005.indd 6ug603-5601_1970E_1005.indd 6 10/25/05 2:15:13 PM10/25/05 2:15:13 PM