Bissell 1970 Vacuum Cleaner User Manual


 
How To Use This Guide
This User’s Guide has been designed to help you get
the utmost satisfaction from your BISSELL QuickWash
Lightweight Deep Cleaner. You’ll find assembly and
operating instructions, safety precautions, as well as
maintenance and troubleshooting instructions. Please read
this User's Guide thoroughly before assembling your cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with the parts and
where they go. Following this User’s Guide will greatly
enhance your ability to get the most performance from
your BISSELL QuickWash for many years.
Your QuickWash assembles quickly and easily. The only
tool you will need to assemble your deep cleaner is a
Phillips Head ( ) screwdriver.
Your QuickWash is packaged with the following items:
Handle Assembly
Upper Body
Lower Body with Collection Tank
Clean Water/Solution Tank
3 Screws
Slide Upper Body into Lower Body.
Secure with Screws.
Slide Strain Reliever Handle down into Upper Body until it will
go no further.
Secure with Screw.
Place Clean Water/Solution Tank on back of unit.
Clean Water/Solution Tank - holds approximately 2 Litres
of hand hot tap water and cleaning solution.
Collection Tank - holds approximately 2 Litres of dirty water.
Power Cord - for storage, wrap Power Cord around Upper and
Lower Cord Wraps, and secure Plug to Cord with molded clip.
5
1.
2.
How To Assemble
3.
4.
5.
Other Components
1.
2.
3.
4.
5.
ug603-5601_1970E_1005.indd 5ug603-5601_1970E_1005.indd 5 10/25/05 2:15:13 PM10/25/05 2:15:13 PM