Filter
Top Products
www.bissell.com 800.237.7691
Operations
8
Cleaning with Attachments
Your Deep Cleaner is equipped with a
hose and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
1a. Check manufacturer’s tag before clean-
ing. “W” or “WS” on the tag means you
can use your Deep Cleaner. If the tag is
coded with an “X” or an “S” (with a diag-
onal stripe through it), or says “Dry Clean
Only”, do not proceed with any deep
cleaning machine. Do not use on velvet or
silk. If manufacturer’s tag is missing or not
coded, check with your furniture dealer.
1b. Check for colorfastness in an incon-
spicuous place.
1c. If possible, check upholstery stuffing.
Colored stuffing may bleed through
fabric when wet.
1d. Plan activities to allow upholstery
time to dry.
1e. Vacuum area thoroughly.
2. Follow the instructions on page 6 for
filling the tank.
3. Set the ReadyTools dial to the “TOOLS” setting.
4. Attach the cleaning tool to the end of the hose.
5. Plug in and turn the power switch to the
ON (I) position.
6. Clean by pressing the trigger to spray
solution onto the area to be cleaned.
Slowly move the tool back and forth over
the soiled surface. Release the trigger to
suction dirty water. Continue to clean in
the area, working in small sections, until
dirt is removed.
Caution: Do Not Overwet.
7. When finished cleaning, remove and rinse
tool(s) in clean, running water.
8. It is recommended that you suction clean
water from a bowl to rinse out the hose.
9. Lift end of hose and stretch out to ensure all
water is cleared from hose.
4.
9.
3.