Filter
Top Products
www.bissell.com 800.237.7691
7
Operations
Carpet cleaning continued
6. Release the trigger and make one
slow forward and backward pass
over the same area.
7. Repeat steps 5 and 6 until solution
being pulled up appears clean.
8. Empty the collection tank when dirty
water reaches the full line, or when
the solution tank is empty.
Empty the collection tank
1. Turn power switch OFF (O) and unplug
power cord from outlet.
2. Remove the collection tank from base
of unit.
2a. Release collection tank latches
(on each side) by pulling up from the
bottom of latch and then out.
2b. Carefully remove the top of the tank
by lifting up on the tank handle.
3. Carry collection tank to a toilet or sink.
To empty, pour out contents using opening
at back of tank.
4. Rinse collection tank thoroughly and replace
on unit.
5. Refill solution tank and continue cleaning.
2a.
3.
2b.