Bissell 16N5 Vacuum Cleaner User Manual


 
Using the tools
1 Make sure the cleaner is in the upright
position.
2. Remove the hose wand from the wand
base. This automatically diverts the
suction to the hose. Unwrap the hose from
the cleaner.
3. Use the hose and wand alone or attach
any of the tools to the end of the hose
wand.
TurboBrush
Use rotating brush action for small areas such
as stairs and upholstery.
Note: Press gently when using the
TurboBrush to gain maximum cleaning.
Too much pressure could cause the brush
to stop rotating.
Combination brush
Use longer soft bristles for dusting.
Remove long bristle portion and use shorter
stiff bristles when agitation is needed to
remove debris.
Crevice tool
Use in tight narrow spaces
Telescoping extension wand
Use with desired attachment for a longer
reach. To extend the wand, twist the collar
to “Unlock” and push away from you. Twist
the collar to “Lock” to lock into place. To
retract, twist to unlock, pull toward you and
twist to relock.
All available items may not be included with
your model. Other tools are available; to order,
please refer to page 19.
8
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
Operation
ATTENTION:
Always place the vacuum
cleaner on the floor in its fully
upright position when using
tools. Placing the vacuum in
this position automatically
stops the rotating brush.
2
CAUTION:
To avoid personal injury
and to prevent the cleaner
from falling when cleaning
stairs, always place it at
the bottom of the stairs.