Filter
Top Products
Replacing the HEPA filter cartridge
The HEPA filter cartridge should be replaced
if machine performance is noticeably
declining. More or less frequent replacing
may be required based on individual
vacuuming habits and types of debris
picked up.
Note: To have the benefits of the
Airetight
TM
HEPA System, you must
use the BISSELL HEPA filter cartridge.
1. Remove the dirt container.
2. To remove the HEPA filter cartridge,
push in on the front of the filter door to
unlatch. Lift up to access.
3. To check or remove, unscrew the center
screw.
4. If necessary, replace the used HEPA
filter cartridge with a new one.
Note: to avoid damaging the HEPA
filter cartridge and reducing its
filtration capabilities, be careful not
to touch the filter material. The HEPA
filter cartridge is not washable.
5. To ensure a tight seal be sure to tighten
the filter cartridge screw until snug.
DO NOT OVER TIGHTEN.
Make sure the filter door latches
completely.
11
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
1
Maintenance and care
3