Filter
Top Products
Troubleshooting
17
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
Vacuum cleaner is difficult to push
Possible causes Remedies
1. Incorrect height setting 1. Turn dial to higher setting
Visible dust escaping from cleaner
Possible causes Remedies
1. Filter door and or gasket missing 1. Check filter door and gasket
or not installed properly
2. Foam filter missing or not installed properly 2. Check foam filter for correct installation
3. HEPA filter cartridge missing or not installed properly 3. Check HEPA filter cartridge for
correct installation
4. Dirt container not installed properly 4. Make sure dirt container is correctly
positioned and snapped into place
5. Dirt container not assembled properly 5. Check screen, upper and lower portions of
the dirt container for proper assembly
6. Hose not installed properly 6. Make sure hose wand is fully seated in
base, and that the hose is assembled
correctly to the unit. See page 5.
Also make sure foot hose is properly
attached to diverter area
7. Hole or crack in hose 7. Check hose for holes or cracks and replace
if needed
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-263-2535.