Filter
Top Products
11
Disconnect the TurboBrush from the flex hose by pushing
down on the button lock and pulling straight off.
Once removed from the Flex Hose, the TurboBrush can
be cleaned.
A Move the switch to the “SUCTION” position.
B Rinse under running water.
C Check spray nozzle for dirt. If necessary, clean with a soft
bristle brush.
D Replace TurboBrush in the special storage location on the
handle front. (on select models only)
Plan activities to give carpet time to dry.
Remove easily moved furniture from the room (chairs,
lamps, coffee tables, etc).
Vacuum thoroughly to pick up loose debris and pet hair
before using the ProHeat ClearView.
Plan your cleaning route to leave an exit path. It is best to
begin cleaning in the corner farthest from your exit.
Set up the machine following instructions in
The Features section, pages 6-11.
Use a BISSELL Advanced Cleaning Formula in the SmartMix
tank.When cleaning carpets, stairs or upholstery, use clean
water in the SmartMix Tank for gentle cleaning or rinsing.
Choose the SmartMix setting to match the cleaning job.
Set the ReadyTools switch to either Tools/PreTreat or Floor
Cleaning.
1.
2.
When You’re Done
Operations
1.
2.
3.
4.
Machine Preparation
1.
2.
3.
4.
B
R
US
H
S
U
C
T
IO
N
1
START
HERE
4’
2
3
4
8
7
6
5
9
10
11
12
EXIT
3’
Before You Clean Carpets