Bissell 1699 Vacuum Cleaner User Manual


 
Troubleshooting / User Maintenance (Continued)
Cleaner not picking up solution.
Possible Causes Remedies
1. Ready Tools dial may be on the 1. Set ReadyTools dial to either or
wrong setting for the cleaning job. Tools/PreTreat Floor Cleaning.
2. Nozzle Window may not be 2. Press down firmly on the black
properly attached. oval gasket at the top window to
make sure the two tabs on the
back of the Nozzle Window are
snapped into the mating slots in
the main housing.
3. Tank-in-Tank lid is not properly installed. 3. Re-install lid; refer to page 9.
4. Tank-in-Tank is not properly seated. 4. Tank-In-Tank must be firmly
seated to function; remove and
reseat Tank-in-Tank.
5. Poor tool position. 5. Adjust angle; apply more
(Hand held attachments only). downward pressure.
6. Tank-in-Tank has picked up 6. Empty Tank-in-Tank, refer to
maximum dirty water. page 11.
Other Maintenance or Service not included above should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operations, call 1-800-237-7691
Please do not return this product to the store
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. EST
Saturday 9 a.m. — 8 p.m. EST
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event
of a warranty claim. See "About Your Warranty" on page 20 for details.
BISSELL Consumer Services
18
www.bissell.com 800.237.7691
ug310-5868_1699_306.indd 18ug310-5868_1699_306.indd 18 3/1/06 3:14:04 PM3/1/06 3:14:04 PM