Filter
Top Products
13
Maintenance/Storage Continued
Rinse out Tank-in-Tank and reseat the tank onto
the machine.
Clean out the Flow Indicator Filter each time it is
used to ensure best cleaning performance. Unscrew
the Flow Indicator cap, lift out the red Rotor and
white Filter. Rinse all three parts in tap water.
Replace the Filter and Rotor. Replace the Flow
Indicator Cap; turn until snug, do not over-tighten.
Wipe all exterior surfaces with a soft cloth.
Store cleaner in a protected, dry area.
When carpet is dry, vacuum again to remove
hair and fuzz that the PowerLifter Plus may
have loosened.
NOTE: Turn off machine and unplug from
wall outlet.
Step on Handle Release pedal and recline Handle
on floor (see illustration).
Remove the Tank-in-Tank. Set aside (see illustration).
Remove the Belt Access Door located near the
ReadyTools Dial. Insert a flathead screwdriver into
the slot nearest the handle to gently pry off the
door (see illustration).
6.
7.
8.
9.
Pump & Brush Belts Replacement
To Remove Broken Pump & Brush Belts
1.
2.
3.
10.
Tip:
SmartMix Bottle
may be stored with
concentrate ready
for your next clean-
ing job. Make sure
dial is turned to the
WATER ONLY
Setting when storing
When filling bottle or
storing unit, set
Dial to:
1
2
3
Cap
Rotor
Filter