Filter
Top Products
10
Normal Cleaning
Plug the PowerLifter Plus into a proper outlet and turn the
Power Switch ON. Set the ReadyTools Dial to FLOORCLEANING
While pressing the Spray Trigger, make one slow forward
and back wet pass. Let the BISSELL Deep Cleaning
Formula and DirtLifter PowerBrush do the work for you.
Caution: Do not overwet.
NOTE: Do not run over loose objects or edges of
area rugs. Stalling brush may result in premature
belt failure.
Release the Spray Trigger and make one slow forward and back
pass over the same area to remove any residual dirty water.
Repeat cleaning passes without pressing the Spray Trigger
until water is no longer being suctioned up through the
FLOOR NOZZLE window.
NOTE: Both the SmartMix Bottle and Tank-in-Tank
must have liquid in them in order for the machine
to spray. If one tank is empty the machine will not
apply either cleaning solution or water.
After cleaning, you may want to turn the SmartMix Dial to
WATER ONLY to give your carpeting a final rinse. This will
ensure thorough removal of embedded dirt loosened by the
Deep Cleaning Formula. BISSELL Deep Cleaning Formulas
contain a Scotchgard agent that helps your carpets repel
dirt and keeps them looking good longer.
When cleaning job is complete, refer to the
Maintenance/Storage section on pages 12-13.
1.
2.
3.
4.
5.
Tip:
Thorough
vacuuming before
deep cleaning will
prevent early
clogging of the
lint trap.
6.
When filling bottle
storing unit, set
Dial to: