Bissell 1620 Vacuum Cleaner User Manual


 
Connect the Tough Stain Tool to the Flex Hose.
Plug into a proper outlet and turn the Power Switch ON.
While pressing the trigger, slowly move the spraying tool back
and forth over the soiled surface. Release the trigger to suction
soiled water.
Continue to clean soiled area, working in small sections, until
no more dirt can be removed.
Caution: Do not overwet.
When the cleaning job is complete, refer to the
Maintenance/Storage section below.
Turn Power Switch OFF. Make sure to switch SmartMix Dial to
WATER ONLY.
Unplug Power Cord from outlet and wrap cord around the
Quick Release Cord Wrap.
Remove and rinse tools in clean water. Dry and replace.
Coil Flex Hose through Flex Hose Storage Brackets.
Remove Tank-in-Tank. Dispose of dirty water. See The Basics
section, page 8.
12
1.
3.
4.
2.
5.
CAUTION:
PowerLifterPlus uses water
and must not be stored
where there is a danger of
freezing. Freezing will
damage internal components
and void the warranty.
Quick Release
Cord Wrap™
Flex Hose
Storage Bracket
Cleaning Technique
1.
2.
3.
4.
5.
Maintenance/Storage