7
SpotBot Product Features
Front View
Clean/Solution Tank Is located to the right of the
unit when you are facing the unit.
Automatic Smart System
™
Control PaneI located
in the center of the unit and is where you will begin
selection of the Smart Cleaning Cycle you would
like to use (Detailed instructions on page 8).
Dirty/Collection Tank Looking at the front of the
unit, the Dirty/Collection tank is on the left side.
Vacuum Flex Hose wraps around the center of the
unit. This serves as the travel path for dirty water
and formula that is suctioned up into the Dirty/
Collection tank.
Vacuum Flex Hose Release Button Press this
button to release the Flex Hose to attach the Tough
Stain Brush for manual cleaning.
Spray Trigger When cleaning in the Manual Mode,
depress the Spray Trigger to spray water and
formula unto the area to be cleaned.
Storage Tray (Select Models Only) Is provided for
when the unit is stored.
Underside View
Handsfree Cleaning Brushes Provide the
cleaning action when using the Surface Stain or
Set-In Handsfree Cleaning cycles.
Spray Tip Water and Solution are dispensed here
when cleaning in the Handsfree mode.
Vacuum Suction Nozzles Provide the suction path
when using the Handsfree Cleaning cycles.
Back View
Handsfree Cleaning Window Provides an area to
see the Handsfree Cleaning Action.
Flex Hose Clip Is attached to the unit and is a
guide for the Vacuum Flex Hose.
Tough Stain Brush™ Storage The Tough Stain
Brush is conveniently stored on board.
Power Cord Has a three-prong plug and stores on
the back of the unit around the Oval Cord Wrap.
NOTE: Unwrap the Power Cord completely
before operating the unit.
Oval Cord Wrap Serves as a guide for the Power
Cord for storage. The Oval Cord Wrap can be gently
pushed in during use.
1.
2.
3.
7.
8.
10.
13.
14.
4.
5.
6.
9.
11.
12.
15.
ug203-6650_1200_805.indd 7ug203-6650_1200_805.indd 7 11/1/05 11:44:28 AM11/1/05 11:44:28 AM