Filter
Top Products
www.bissell.com
Operations
8
Power cord usage
1. To use your vacuum, remove the cord and
plug it into an electrical outlet. For your
convenience, there is a quick release cord
wrap for easy cord removal. There is also
a cord clip that is part of the upper cord
wrap where you can attach the cord
when vacuuming.
2. When you are finished cleaning, turn
vacuum cleaner off.
3. Unplug power cord by grasping the plug
(NOT the cord) and disconnect from outlet.
4. Loop power cord around cord wraps on
side of vacuum cleaner. Be sure to first
return the quick release cord wrap back
to its original position before wrapping
the cord.
5. Clip molded plug to power cord to secure.
To maximize your cleaning
performance and extend the life of
your vacuum, it is very important that
you empty your dirt container and
check and clean your filters frequently.
Perform the following maintenance
steps:
1. Empty the dirt container when the dirt
reaches the “Full” line on the container, or
more frequently to prevent overfills. For best
performance, empty after each use.
2. Check the pre-motor filter and post-motor
HEPA Media Filter* at least once a month,
clean or replace as needed.
3. Replace the post-motor HEPA Media
Filter* every three to six months.
NOTE: More frequent filter cleaning
may be necessary if you are
vacuuming new carpet, fine dust,
or have allergy concerns. Follow
the instructions on the following
pages to perform these simple
maintenance steps.
Quick Release
Cord Wrap
1.
Maintenance and care
WARNING:
To reduce the risk of electric
shock, turn power switch OFF and
disconnect plug from electrical out-
let before performing maintenance
or troubleshooting checks.
Tip:
To maximize cleaning performance,
check and clean or replace all filters
as suggested.
* The filter media, not the vacuum as a
whole, complies with the IEST-RP-CC001.5
HEPA Standard.