Bissell 10M2 Vacuum Cleaner User Manual


 
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
8
Emptying the dirt cup
Empty the dirt cup as soon as the dirt
reaches the “FULL” lines on the sides of
the dirt cup.
1. Unplug the vacuum from the electrical
outlet.
2. Remove the hose by turning the hose
connector counter clockwise and pulling it
out from the suction inlet. Set hose aside.
3. Press the dirt cup release button on the
carry handle and lift up to remove the dirt
cup.
4. Choose an emptying method. Method #2
is recommended for allergy suffers.
Method #1 – Hold the dirt cup over a
trash can and push the emptying button to
open the bottom. Close the bottom after
the dirt empties.
Method #2 – Place a plastic bag over
the bottom of the dirt cup. Push the
emptying button through the plastic to
open the bottom. After the dust settles,
close the bottom and remove the bag to
discard.
5. Replace the dirt cup by placing it back
into the vacuum and pushing down on
the carry handle until it snaps back into
place.
2.
3.
4.
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect plug from
electrical outlet before
performing maintenance or
troubleshooting checks.
Dirt Cup
Release
Button
Emptying
Button