Filter
Top Products
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
12
Clearing clogs from the dirt cup
1. Unplug the vacuum from electrical out-
let.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the
dirt cup on page 8.
3. Remove the dirt cup filter assembly
from the dirt cup, following step 2 of
Clean the dirt cup filter on page 9.
4. Tap the dirt cup filter assembly over a
garbage container to remove any dirt
or debris from the dirt cup filter screen
that surrounds the dirt cup filter.
5. Reach up into the dirt cup to clear
any dirt or debris from the dirt cup.
6. Check to see if there are any clogs in
the suction inlet.
7. After clearing any dirt or debris from
the dirt cup, replace the dirt cup filter
assembly back in the dirt cup follow-
ing step 8 of Cleaning the dirt cup
filter on page 9.